Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Simonnet, M.; Sittel, T.*; We
ling, P.*; Geist, A.*
Energies (Internet), 15(20), p.7724_1 - 7724_10, 2022/10
Times Cited Count：1 Percentile：9.62(Energy & Fuels)Sasaki, Yuji; Morita, Keisuke; Kitatsuji, Yoshihiro; Ito, Keisuke*; Yoshizuka, Kazuharu*
Solvent Extraction Research and Development, Japan, 28(2), p.121 - 131, 2021/00
Times Cited Count：2 Percentile：14.19(Chemistry, Multidisciplinary)High concentration of Cs is present in high-level radioactive waste. It is well-known that Cs is an alkali element and difficult to extract completely into an organic phase. Crown ether compounds are widely available for Cs extractants; DtBuDB18C6 (di-
-butyl-dibenzo-18crown6), was used in this study. Organic solvents used for the industrial applications, such as 
-dodecane and 1-octanol, have low solubility concerning the compound; other solvents were employed and tested. In this study, ketone-, ether-, and ester-type solvents showed high solubility for DtBuDB18C6 and DtBuDB18C6, when dissolved in ketones and alcohols, exhibited relatively high Cs distribution ratios (
(Cs)), closely to 10.
Sr analysisHorita, Takuma; Asai, Shiho*; Konda, Miki; Matsueda, Makoto; Hanzawa, Yukiko; Kitatsuji, Yoshihiro
Bunseki Kagaku, 69(10/11), p.619 - 626, 2020/10
Times Cited Count：0 Percentile：0(Chemistry, Analytical)We have developed a Sr adsorption fiber for rapid analysis of Sr. The prepared Sr adsorption fiber has a Sr-extraction layer that densely retains a Sr-selective extractant, an 18-crown-6 ether derivative, on the fiber surface. Hydrophobic group-containing polymer chains embedded onto the surface of the fiber allow to form a hydrophobic phase, incorporating Sr-selective extractants. This unique surface structure provides high adsorption capacity, leading to rapid and highly efficient adsorption of Sr
. The adsorption capacity of the Sr adsorption fiber was 3 times higher than commercially available 18-crown-6 ether derivative-impregnated resin (Sr Resin). The equilibrium adsorption capacity of the Sr adsorption fiber was comparable to the Sr Resin. The retained Sr was finally determined by a GM counter. The total analysis time including the Sr adsorption and measurement was about 1 hour.
Simonnet, M.; Miyazaki, Yuji*; Suzuki, Shinichi; Yaita, Tsuyoshi
Solvent Extraction and Ion Exchange, 37(1), p.81 - 95, 2019/00
Times Cited Count：5 Percentile：21.69(Chemistry, Multidisciplinary)Simonnet, M.; Miyazaki, Yuji; Suzuki, Shinichi; Yaita, Tsuyoshi
Progress in Nuclear Science and Technology (Internet), 5, p.66 - 69, 2018/11
Yonezawa, Chushiro; Choppin, G. R.*
Journal of Radioanalytical and Nuclear Chemistry, 134(1), p.233 - 239, 1989/00
Times Cited Count：29 Percentile：92.49(Chemistry, Analytical)no abstracts in English
; Saito, Keiichiro; Shiba, Koreyuki
Journal of Nuclear Science and Technology, 20(5), p.439 - 440, 1983/00
Times Cited Count：53 Percentile：99.42(Nuclear Science & Technology)no abstracts in English
Simonnet, M.; Miyazaki, Yuji; Suzuki, Shinichi; Yaita, Tsuyoshi
no journal, ,
Horita, Takuma; Asai, Shiho; Hanzawa, Yukiko; Saito, Kyoichi*; Sugo, Takanobu*; Fujiwara, Kunio*; Kitatsuji, Yoshihiro
no journal, ,
There has been an increasing importance of the development of rapid Sr analysis technique, responding to needs in Fukushima Daiichi NPP. We have been trying to achieve a rapid analysis using a fibrous Sr adsorbent which has high selectivity for Sr. The fiber we prepared that has a high-density Sr adsorption phase on its surface, and so it can adsorb Sr on the fiber surface. On the other hand, base material of a conventional Sr adsorptive resin for Sr analysis (Sr Resin) is bead-shaped resin, and Sr is adsorbed inside pores. The fiber allows highly efficient 
counting by minimizing the self-attenuation effects. The adsorption capacity and selectivity of the fiber was nearly the same as those of the Sr Resin. From these results, we confirmed that the fiber has performance for efficient counting of Sr.
Sasaki, Yuji; Yoshizuka, Kazuharu*
no journal, ,
It is important to study the solvent extraction of Cs, therefore the study on the diluent for the crown compounds is necessary. In this work, we investigate the physical properties of diluents and Cs extraction using the extraction solvents. The results indicate that distribution of Cs is higher when diluent having higher dielectric constant is used. Furthermore, the results using 2-nonanone, which have high dielectric constant, give the strong dependence of D(Cs) on nitric acid concentration.
